--- title: "Cantilever Rack in Los Angeles, CA | LA Rack" url: https://losangelespalletrack.com/products/cantilever-rack description: "Cantilever Rack for Los Angeles, CA warehouses. Compare layouts, get itemized pricing and plan installation. Free Design Consultation." lang: en --- Image: Cantilever Rack system in an industrial warehouse (https://losangelespalletrack.com/__l5e/assets-v1/61782300-b59a-42bd-8e55-59d35c06d30f/cantilever-hero.jpg) # Cantilever Rack in Los Angeles, CA For Los Angeles warehouses, cantilever rack planning starts with what must remain accessible while inventory moves. Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. We compare the system with your stock quantities, handling equipment and receiving workload before recommending a layout. Our service territory includes the South Bay, Long Beach, Vernon and Commerce, plus Inland Empire distribution buildings. You get a Free Design Consultation, a drawing and an itemized scope, with access, load capacity and installation requirements discussed before you commit. Cantilever rack exists because pallet rack has a front beam and long material doesn't care about pallets. Arms extend out from a column with no obstruction across the front, so lumber, pipe, tube, bar stock, sheet goods, and furniture load from the side and come off the same way, without lifting over anything. Choose it whenever product length, not weight or SKU count, is what's driving the storage problem - the alternative is usually leaning bundles against a wall or floor-stacking them where forklifts have to work around them. Arm length, capacity, and column spacing get set by the bundles you actually handle, not a generic length. (213) 715-0940 ## Why Los Angeles Warehouses Work With Us Street access, receiving space and older building columns deserve a separate review in Los Angeles. We plan around the Alameda freight corridor without assuming that every site has a trailer yard, modern clear height or room to stage a full delivery inside. Cantilever design begins with bundle length, weight and stiffness rather than standard pallet dimensions. We set support spacing to control sag, check arm and column loading, and compare wall-side storage with a double-sided run. A drawing should show the load itself as well as the steel supporting it. For apparel distribution, food distribution, e-commerce fulfillment in Los Angeles, that means discussing the actual receiving and dispatch workload before recommending a storage block. As part of Warehouse Equipment & Supplies Co., we give your Los Angeles team one contact for layout questions, itemized pricing and installation planning. Loads, clear height and handling routes are considered with the proposed configuration. We explain the scope, access assumptions and approval steps before you choose a schedule, and retain the layout for later additions of new rack. ## How Cantilever Rack Works 1 ### Columns and bases Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick. 2 ### Arms at adjustable heights Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place. 3 ### Column spacing against sag Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly. 4 ### Single-sided or double-sided Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint. Image: Cantilever warehouse racking holding steel tubing (https://losangelespalletrack.com/__l5e/assets-v1/fcb5d044-be4c-4333-95ad-54c985bca1e2/cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://losangelespalletrack.com/__l5e/assets-v1/025dbef7-6066-4c5b-bb74-3349c2770805/cantilever-3b.jpg) ## Where It Fits Best Lumber, plywood, and sheet goods Pipe, tube, conduit, and bar stock Steel service center inventory Furniture, doors, and windows Long or awkward loads currently sitting on the floor ## What We Need to Design It - What are the dimensions of the product being stored, length included? - What's the typical weight per bundle? - Straight arms or inclined arms - do you need lips to hold round stock? - Single-sided along a wall, or double-sided in open floor? - What's the clear height and the reach of your handling equipment? ## What a Project Includes Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs. From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out. The quote itemizes columns, bases, arms and bracing, with a CAD drawing showing the run, arm levels and rated capacities per arm. Experienced installation crews we schedule and manage set bases anchored to the floor, align columns, brace the run and set arm elevations to the drawing. The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space previously occupied by long material. The CAD layout shows the storage arrangement, access routes, level elevations and rated configuration. Your itemized quote separates new system components, guarding, freight and installation, so you can compare alternatives rather than judging a lump sum. We confirm capacities for the final beam heights and load profiles before finalizing the layout. Once the plan and access conditions are agreed, delivery and installation are sequenced around the work zones available. Experienced installation crews we schedule and manage set the system anchored to the floor and align it to the agreed scope, with loaded travel checks for moving lanes and case tests for carton flow. Your team receives capacity information and a final layout, plus clear loading and replenishment expectations. Later additions are reviewed against that configuration instead of assuming unused height can always take another level. 1 Consultation 2 CAD layout 3 Itemized quote 4 Installation & handover ## Recent Installations A selection of warehouse storage installations. Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://losangelespalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://losangelespalletrack.com/projects ## Get a Cantilever Rack Quote Send the basics and we will come back with a layout and pricing. Prefer to talk? Call (213) 715-0940. ### What's Included: - Free warehouse consultation - CAD layout drawings - Itemized project quote - Rack type recommendations - Installation timeline ## Cantilever Rack Questions We Hear Most ### How much weight can cantilever rack hold? ### What type of pallet rack do I need? ### What size cantilever rack do I need? ### How long does it take to get and install cantilever rack? ### Do you install pallet rack? ## Cantilever Rack by Service Area Delivery and installation across Greater Los Angeles and the Inland Empire. Los Angeles: https://losangelespalletrack.com/service-area/los-angeles/cantilever-rack Long Beach: https://losangelespalletrack.com/service-area/long-beach/cantilever-rack Vernon: https://losangelespalletrack.com/service-area/vernon/cantilever-rack Commerce: https://losangelespalletrack.com/service-area/commerce/cantilever-rack City of Industry: https://losangelespalletrack.com/service-area/city-of-industry/cantilever-rack Santa Fe Springs: https://losangelespalletrack.com/service-area/santa-fe-springs/cantilever-rack Carson: https://losangelespalletrack.com/service-area/carson/cantilever-rack Compton: https://losangelespalletrack.com/service-area/compton/cantilever-rack Torrance: https://losangelespalletrack.com/service-area/torrance/cantilever-rack Anaheim: https://losangelespalletrack.com/service-area/anaheim/cantilever-rack Ontario: https://losangelespalletrack.com/service-area/ontario/cantilever-rack Rancho Cucamonga: https://losangelespalletrack.com/service-area/rancho-cucamonga/cantilever-rack Fontana: https://losangelespalletrack.com/service-area/fontana/cantilever-rack Riverside: https://losangelespalletrack.com/service-area/riverside/cantilever-rack San Bernardino: https://losangelespalletrack.com/service-area/san-bernardino/cantilever-rack ## Warehouse Storage Products & Services ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. https://losangelespalletrack.com/products/pallet-rack ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. https://losangelespalletrack.com/products/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. https://losangelespalletrack.com/products/pallet-flow-rack ### Drive-In Rack Forklifts enter storage lanes, reducing aisle space for bulk inventory with few SKUs. https://losangelespalletrack.com/products/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. https://losangelespalletrack.com/products/carton-flow-rack ### Warehouse Relocation Rack teardown, labeled moves and reinstallation planned around the new building and your inventory cutover. https://losangelespalletrack.com/warehouse-relocation ## Where We Work Based in Los Angeles, we serve greater Los Angeles and the Inland Empire with industrial pallet racks and warehouse storage solutions. ### Los Angeles Pallet Rack #### Address 835 Wilshire Blvd Ste 500 #653 Los Angeles, CA 90017 #### Phone (213) 715-0940 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Ready to Price Cantilever Rack? Call (213) 715-0940 or request a quote and we will start a layout. (213) 715-0940 Tap to Call: (213) 715-0940 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://losangelespalletrack.com/#business", "name": "Los Angeles Pallet Rack", "url": "https://losangelespalletrack.com/", "telephone": "(213) 715-0940", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com/" }, "address": { "@type": "PostalAddress", "streetAddress": "835 Wilshire Blvd, Ste 500 #653", "addressLocality": "Los Angeles", "addressRegion": "CA", "postalCode": "90017", "addressCountry": "US" }, "hasMap": "https://maps.google.com/maps?q=Los+Angeles+Pallet+Rack%2C+835+Wilshire+Blvd+Ste+500+%23653%2C+Los+Angeles%2C+CA+90017&t=&z=15&ie=UTF8&iwloc=B&output=embed", "areaServed": [ { "@type": "City", "name": "Los Angeles", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Long Beach", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Vernon", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Commerce", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "City of Industry", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Santa Fe Springs", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Carson", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Compton", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Torrance", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Anaheim", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Ontario", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Rancho Cucamonga", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Fontana", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Riverside", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "San Bernardino", "containedInPlace": { "@type": "State", "name": "California" } } ] }, { "@type": "Service", "@id": "https://losangelespalletrack.com/products/cantilever-rack#service", "name": "Cantilever Rack in Los Angeles, CA", "serviceType": "Cantilever Rack", "url": "https://losangelespalletrack.com/products/cantilever-rack", "provider": { "@id": "https://losangelespalletrack.com/#business" }, "areaServed": [ { "@type": "City", "name": "Los Angeles", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Long Beach", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Vernon", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Commerce", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "City of Industry", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Santa Fe Springs", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Carson", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Compton", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Torrance", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Anaheim", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Ontario", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Rancho Cucamonga", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Fontana", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Riverside", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "San Bernardino", "containedInPlace": { "@type": "State", "name": "California" } } ] } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://losangelespalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Products", "item": "https://losangelespalletrack.com/products" }, { "@type": "ListItem", "position": 3, "name": "Cantilever Rack", "item": "https://losangelespalletrack.com/products/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How much weight can cantilever rack hold?", "acceptedAnswer": { "@type": "Answer", "text": "There is no single capacity that applies to every configuration. Beam capacity is rated per pair, per level; frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and put the finished capacities on load plaques." } }, { "@type": "Question", "name": "What type of pallet rack do I need?", "acceptedAnswer": { "@type": "Answer", "text": "Selective teardrop rack is the starting point for mixed SKUs and direct pallet access. Pushback stores 2–6 deep with LIFO rotation by SKU; pallet flow suits FIFO and dated stock. Drive-in suits bulk quantities of few SKUs, cantilever supports long loads, and carton flow serves case picking. We compare your stock quantities and picking method before recommending a system." } }, { "@type": "Question", "name": "What size cantilever rack do I need?", "acceptedAnswer": { "@type": "Answer", "text": "For standard 48-inch-deep pallets, 42-inch-deep uprights are a common starting point. Common beam lengths are 96 inches for two 40-inch-wide pallets, 108 inches, and 144 inches for three pallets. Rack height depends on clear height and forklift lift height. Measure your real pallets, including load overhang; long loads and case-picking shelves need dimensions matched to the material rather than these pallet-bay defaults." } }, { "@type": "Question", "name": "How long does it take to get and install cantilever rack?", "acceptedAnswer": { "@type": "Answer", "text": "Standard teardrop sizes often quick-ship; high-density systems and non-standard sizes take longer. We confirm lead time on the quote. Installation time depends on bay count, access and site readiness, and we agree on work zones before scheduling crews." } }, { "@type": "Question", "name": "Do you install pallet rack?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. We handle design, supply and installation with experienced installation crews we schedule and manage. The rack is anchored to the floor, aligned and labeled with capacities for the finished layout. We agree on cleared work zones and access with your team before installation." } } ] } ] ```